No overselling, no guesswork — just a Hvac crew that diagnoses it right the first time. Priority scheduling available across Alamo and the surrounding zip codes.
Call +1-866-805-8548 and describe what your system is doing — the symptoms help us send a tech prepared with the right parts.
A licensed technician arrives, runs a full diagnostic, and explains exactly what's wrong in plain language.
Warranty details are explained clearly so you know exactly what's covered going forward.
Leonard HVAC didn't start as a franchise chasing volume. Every technician we send to your door is background-checked, factory-trained, and licensed to work on the systems installed throughout Alamo, TX.
We're not the biggest name in Alamo — we're the crew that answers the phone at 2am when your furnace quits in the middle of a cold snap. Every job we run is backed by full liability coverage and current state licensing, and we keep that documentation available on request for every job, big or small.
Being local matters more than most companies let on. That local knowledge shapes how we diagnose problems — it's the difference between a tech who's guessing and a tech who's seen your exact situation a hundred times before.
Ask around Alamo and you'll hear the same complaint about a lot of HVAC companies. That's the gap we built Leonard HVAC to close. Every dispatcher, every technician, and every follow-up call is held to the same standard, because a customer who trusts us once tends to call us again — and Alamo is a small enough community that reputation travels fast.
That local context saves time on every call, because we're not starting from zero on basic questions about your neighborhood or your system. We keep parts inventory stocked based on what actually fails most often on Alamo's housing stock.
Every service below is backed by the same licensing, warranty, and upfront pricing you get on any job we run.
When your Hvac system fails without warning, waiting days for an appointment isn't an option. Our Alamo dispatch team prioritizes no-heat and no-cooling calls so a technician is diagnosing your system as fast as physically possible.
Once a technician is on-site, the goal is always a same-visit repair — most emergency calls in Alamo get resolved in a single trip, not a multi-day back-and-forth.
If your unit is past its expected service life, running loud, or spiking your utility bill, a replacement conversation is worth having. We walk Alamo homeowners through financing and rebate options where available before a single piece of equipment gets ordered.
Every install ends with a performance test, confirming airflow, temperature split, and refrigerant charge are all where they should be before we consider the job finished.
Commercial equipment operates differently than a residential unit, and it needs technicians who actually understand rooftop packages and multi-zone systems. Our commercial division services light industrial and warehouse ventilation across Alamo, with priority response for facilities that can't afford downtime.
Property managers working with multiple Alamo locations can set up a standing account so every site gets consistent service history and pricing.
Preventive maintenance is the cheapest repair you'll ever pay for, because it's the one that prevents the bigger bill. Beyond standard tune-ups, we also handle indoor air quality upgrades for homes with allergy or asthma concerns for Alamo households that want more than just temperature control.
A tune-up typically takes under an hour and covers the checkpoints most likely to catch a problem before it becomes a breakdown.
Guarantees only mean something if a company actually honors them, so here's exactly what ours covers.
If the same issue returns within the warranty period, we come back and fix it at no additional labor cost.
If a competitor's written quote for the same scope of work is genuinely lower, ask us about it.
A technician doesn't consider the job done until the system is tested and performing correctly.
A little attention to how your system is running can save you a lot of money and discomfort.
Rattling during startup often means a component has worked itself loose and needs tightening before it causes real damage.
This is one of the most common complaints we hear on service calls across Alamo.
Gradual efficiency loss is easy to miss month to month, but it adds up fast over a season.
This is one of the warning signs we recommend not waiting on.
A musty smell often points to mold or moisture buildup somewhere in the ductwork.
If you're calling about the same problem every few months, the underlying cause likely hasn't been fully addressed.
You'll know the cost before a wrench touches your system.
Dispatchers give you a realistic arrival window instead of a vague "sometime today".
We don't consider a job finished until the system is actually performing correctly.
Our techs recognize brand-specific quirks instead of learning your system on the job.
You make the final call — we just make sure you have the full picture.
We'll walk you through what's actually available before you decide.
A snapshot of the feedback that keeps us accountable.
"I called three other companies first and this was the only one that actually picked up. The pricing was exactly what they quoted over the phone."
"Scheduled a fall tune-up and they caught a cracked part before it became a real problem. Techs are always polite, always on time, and clean up after themselves."
"They handled the whole install in a single day, exactly like they said they would. New system is noticeably quieter and our energy bill actually dropped."
"Commercial dispatch was quick and the tech understood our system without needing to be walked through it. Documentation for our records was thorough and easy to file."
"Got quotes from four different companies for a replacement and this was the only one that actually walked me through the load calculation. My energy bill dropped noticeably the first month with the new system."
"Called at 11pm during a heat wave and honestly didn't expect anyone to pick up, let alone show up. No overnight surcharge shock — the price matched what dispatch quoted me on the phone."
None of these are unusual or embarrassing — they're just the normal wear and tear that comes with running a system through Alamo's seasonal swings.
The shift between peak heating and peak cooling demand is exactly when older or neglected equipment tends to fail. Filters should be checked monthly during heavy-use seasons and replaced roughly every 60-90 days depending on your household and any pets.
Setting a programmable or smart thermostat to a consistent schedule reduces the number of times the system has to work hard to catch up to a big temperature swing. None of this replaces a professional tune-up, but it does reduce the wear that leads to premature breakdowns between visits.
Whether your Alamo home has a traditional split system, a ductless mini-split, a heat pump, or a hybrid dual-fuel setup, our crews are equipped to diagnose and repair it. If your system was installed by a different company entirely, that's not a problem — we service equipment regardless of who originally put it in, and we'll pull the model and serial information to confirm parts compatibility before any repair begins.
We don't outsource dispatch to a call center that's never met our technicians.
Handles the majority of Alamo installs and specializes in properly sizing equipment for older housing stock.
Keeps the emergency truck stocked based on what actually fails most often locally.
Experienced with the light industrial and retail equipment common across the area.
For emergency no-heat or no-cool calls, we prioritize dispatch and aim to have a technician on-site the same day, often within a couple of hours.
Our policy is simple: you approve the number before we touch the system.
Yes, no-heat and no-cool situations are treated as priority calls regardless of the hour.
Yes — licensing and insurance documentation is available on request for any job, residential or commercial.
We never push a replacement when a straightforward repair will genuinely solve the problem.
Yes, our maintenance plans include seasonal tune-ups, priority scheduling, and discounted repair rates for members.
We cover Alamo and the surrounding communities, including the zip codes listed in our coverage section below.
Yes, we run separate residential and commercial divisions, both fully licensed and equipped for their respective equipment.
If parts require special ordering for a less common brand, we'll communicate that timeline upfront.
Ask about financing during your in-home estimate to see what fits your situation.
Twice-yearly maintenance is the standard we recommend given the temperature swings the area sees.
Check that the thermostat has power and the batteries aren't dead, and check your breaker panel for a tripped switch before calling.
Ask about current after-hours rates when you call +1-866-805-8548.
More involved repairs, like a coil replacement or a refrigerant leak repair, take longer and the tech will give you a realistic estimate before starting.
For most residential visits, yes, an adult should be present to grant access and approve any quoted work.
From the older, established streets near the center of Alamo to the newer developments on the outskirts, our trucks cover the full footprint of the city.
We also work regularly with homeowners associations, property management companies, and multi-unit buildings throughout Alamo.
Qualifying installations can be financed through options we'll walk you through during your in-home estimate, with terms explained clearly before you commit to anything. If a rebate or local incentive program applies to your Alamo installation, our technicians will flag it during the estimate rather than leaving you to track it down after the fact.
We dispatch throughout Alamo and the neighboring communities, keeping response times tight because our trucks stay close to home.
Coverage isn't limited to a single neighborhood or subdivision — our Alamo dispatch zone stretches across the metro area and into the surrounding suburbs and unincorporated communities.
